Goran Pavlović

Tel:  +381 11 2542510
E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Mechanical constructions

University of Kragujevac, Faculty of mechanical engineering in Kraljevo, dipl. ing. (2003)

University of Kragujevac, Faculty of mechanical and civil engineering in Kraljevo, M.Sc. (2010)

University of Kragujevac, Faculty of mechanical and civil engineering in Kraljevo, PhD. (2013)

Research Associate

1. „Development and application of recuperative heat exchangers in mechanical abrasive ambiences“, realized at Faculty of mechanical engineering in Kraljevo, no. EE 302-60B.
2. „Research, development and application of methods and procedures for testing, inspection and certification of machinery and equipments for earth-moving and transportation mechanization“, realized at Faculty of mechanical engineering in Kraljevo, no. TR-7068.
3. „Development of devices for pilot training and modern fighter planes flight simulation comprising of 3DOF Centrifuge and 4DOF spatial disorientation trainer”, no. TR-35023.

1. Savković M., Gašić M., Ćatić D., Nikolić R., Pavlović G.: Optimization of the box section of the main girder of the bridge crane with the rail placed above the web plate, Structural and Multidisciplinary Optimization, ISSN: 1615-1488 (electronic version), 47 (2), pp. 273-288, DOI: 10.1007/s00158-012-0813-5, 2012 (M21).
2. Savković M., Gašić M., Pavlović G., Bulatović R., Zdravković N.: Stress analysis in contact zone between the segments of telescopic booms of hydraulic truck cranes, Thin-Walled Structures, ISSN: 0263-8231, Vol. 85, 332-340, DOI: 10.1016/j.tws.2014.09.009, 2014 (M21).
3. Savković M., Bulatović R., Gašić M., Pavlović G., Stepanović A.: Optimization of the box section of the main girder of the single-girder bridge crane by applying biologically inspired algorithms, Engineering Structures, ISSN: 0141-0296, Vol. 148, pp. 452-465, DOI: 1016/j.engstruct.2017.07.004, 2017 (M21).
4. Marković G., Savković M., Zdravković N., Pavlović G.: Towards better protection of the operator handling the mobile building machines, 6th Youth Simposium in Experimental Solid Mechanics “YSESM '07“, ISSN: 0354-6829, pp. 267-270, 9-12 May, Vrnjačka Banja, Serbia, 2007 (M33).
5. Savković M., Pavlović G., Gašić M., Zdravković N.: Multicriterion optimization of the box section of the main girder of the bridge crane, XX International Conference on Material Handling, Construction and Logistics “MHCL'12“, ISBN: 978-86-7083-763-8, pp. 285-292, October 03–05, Belgrade, Serbia, 2012 (M33)
6. Savković M., Gašić M., Pavlović G., Bulatović R., Zdravković N.: Optimization of the box section of the main girder of the bridge crane according to the criteria of lateral and local stability of plates, The 7th International Symposium “KOD 2012“, ISBN: 978-86-7892-399-9, pp. 113-120, 24-26 May, Balatonfüred, Hungary, 2012 (M33).
7. Pavlović G., Gašić M., Rajović M., Savković M.: Optimization of the box section of the main girders of the bridge crane by using the method of lagrange multipliers, XX International Conference Mathematical and Informational Technologies “MIT-2013”, ISBN: 978-86-80795-20-1, pp. 507-514, September 05–14, Vrnjačka Banja, Serbia; Budva, Montenegro, 2013 (M33).
8. Pavlović G., Gašić M., Savković M., Bulatović R., Zdravković N.: Optimization of the box section of the main girders of the bridge crane for the case of placing the rail in the middle of the top flange, VIII International Conference “Heavy Machinery-HM 2014”, ISBN: 978-86-82631-74-3, Vol. A, pp.105-112, Zlatibor, Serbia, 25-28 June 2014 (M33).
9. Savković M., Gašić M., Zdravković N., Bošković G., Pavlović G.: Fracture analysis of the hydraulic truck crane Atlas 3006, VIII International Conference “Heavy Machinery-HM 2014”, ISBN: 978-86-82631-74-3, Vol. A, pp. 29-35, 25-28 June, Zlatibor, Serbia, 2014 (M33).
10. Stepanić P., Krošnjar A., Pavlović G., Stepanović A.,: Implementation of wireless control on electrical bridge cranes and gantry crane, 23rd Telecommunications forum “TELFOR 2015”, ISBN: 978-1-5090-0054-8, pp. 681-684, November 24-26, Belgrade, Serbia, 2015 (M33).
11. Pavlović G., Kvrgić V., Mitrović S., Savković M., Zdravković N.: Optimization of the box section of the single-girder bridge crane by grg algorithm according to domestic standards and eurocodes, 7th International Scientific Conference On Defensive Technologies “OTEH 2016”, ISBN: 978-86-81123-82-9, pp. 211-217, October 06 – 07, Military Technical Institute, Belgrade, Serbia, 2016 (M33).
12. Pavlović G., Kvrgić V., Savković M., Gašić M., Zdravković N.: The influence of the position of longitudinal stiffeners to the optimum dimensions of the box section of the single-girder bridge crane, 3rd Conference on Mechanical Engineering Technologies and Applications “COMETa 2016”, ISBN: 978-99976-623-7-8, pp. 131-138, 07th – 09th December, East Sarajevo – Jahorina, B&H, Republic of Srpska, 2016 (M33).
13. Zdravković N., Savković M., Marković G., Pavlović G.: The impact of the position of the hydraulic cylinder mounting point on the chassis load in mobile elevating work platforms, The Sixth International Conference On Transport And Logistics “til 2017”, ISBN: 978-86-6055-088-2, pp. 141-144, May 25–26, Niš, Serbia, 2017 (M33).
14. Kvrgić V., Vidaković Ј., Lazarević M., Pavlović G.: Calculation of the acceleration force components and roll and pitch link angles of the CFS and SDT, The Sixth International Congress of Serbian Society of Mechanics, June 19-21, Mountain Tara, Serbia, 2017 (M33).
15. Pavlović G., Savković M., Zdravković N., Kvrgić V., Mitrović S.: Design optimization of the rectangular box section of the double beam bridge crane using Matlab optimization toolbox, IX Triennial International Conference “Heavy Machinery-HM 2017”, 28 June - 1 July, Zlatibor, Serbia, 2017 (M33).
16. Savković M., Gašić M., Zdravković N., Marković G., Pavlović G.: Analysis of influence of the basic parameters of the magnetic separator EcMS-500 for non-ferrous metals on the size of the force of separation, IX Triennial International Conference “Heavy Machinery-HM 2017”, 28 June - 1 July, Zlatibor, Serbia, 2017 (M33).
17. Pavlović G., Savković M., Gasić M., Bulatović R., Zdravković N.: Optimization of the box section of the main girder of the double beam bridge crane according to the criteria of lateral stability and local stability of plates, Machine Design, ISSN: 1821-1259, Vol.4, No.4, pp.197-204, 2012 (M52).
18. Pavlović G., Stepanović А., Vidaković Ј., Savković M., Zdravković N.: Design optimization of the box section of the single-girder bridge crane by generalized reduced gradient algorithm, IMK – 14, Research&Development in Heavy Machinery, ISSN: 0354-6829, vol (21) 3/2015, EN79-EN86, 2015 (M52).
19. Pavlović G., Savković M., Zdravković N.: Optimization of the box section of the main girder of the bridge crane according to criterion of lateral stability, IMK – 14, Research&Development in Heavy Machinery, ISSN: 0354-6829, XVII, vol (17) 4/2011 pp. 1-8, 2011 (M53).
20. Pavlović G., Gašić M., Savković M., Zdravković N.: Comparative analysis of local and lateral stability of plates as the constraint functions within optimization of main girder box section of the bridge crane, IMK – 14, Research&Development in Heavy Machinery, ISSN: 0354-6829, vol (18) 1/2012, pp. EN11-EN18, 2012 (M53).
21. Pavlović G., Savković, M., Gašić, M., Bulatović R.: Application of the method of rigid body in discretization of the supporting structures for dynamic analysis in the case of cantilever crane, 38. Jupiter Conference, ISBN: 978-86-7083-757-7, 3.52-3.57, 15-16 May, Belgrade, Serbia, 2012 (M63).
22. Gašić M., Savković M., Marković G., Zdravković N., Pavlović G.: Methods and procedures for testing of the ROPS structures relevant for certification of earth-moving and transportation mechanization, Quality Festival, ISBN: 86-8663-09-5, pp. 16, 08-11 May, Kragujevac, Serbia, 2007 (M64).

Serbian Chamber of Engineers
Responsible Design Engineer, License 333 L 936 13
Responsible Contracting Engineer, License 434 J 482 15